- item-all
- (COMFAR) ECONOMIC
- (Datasheet) EQ. Sizing and Design
- Academic projects
- ANSYS Fluent
- ASPEN ADSIM
- Aspen Custom Modeler
- ASPEN EDR
- ASPEN Energy Analyzer (Pinch)
- ASPEN HYSYS
- ASPEN PLUS
- AutoCAD(2D Planning & 3D Equipment Design)
- Basic Engineering
- CATIA
- COMSOL _Multiphysics
- Conceptual Design
- Consequence Analysis
- Construction
- Current academic project
- Current industrial project
- Detailed Engineering
- Drafting (PFD-PID)
- Energy/Exergy Analysis
- Engineering
- FEED
- FORTRAN
- FS/COMFAR-
- GAMBIT Fluent
- Industrial and semi-industrial projects
- MATLAB
- MC
- Optimization
- PFD P&ID
- PHAST
- Procurement
- REVIT & PDMS
- Sample of ChemEngProj
- SOLIDWORK
- Technical knowledge (License)
- Description Lubricating oils are obtained from the heavy oil cuts obtained from the distillation tower in the vacuum of the refinery (lube cut) as feed. To […]
- Introduction The Merox process is essentially the mercaptan oxidation process aimed at sweetening or removing mercaptans and hydrogen sulfide from LPG, light naphtha, kerosene, and jet […]
- Introduction Vertical condensers are key components in many industrial processes and thermal systems. These devices are primarily used as part of heat exchange and distillation systems […]
- Description An industrial reactor is a vessel or container designed to carry out chemical reactions on an industrial scale. These devices are widely used in the […]
- Description Shell and tube heat exchangers are among the most widely used heat transfer equipment in various industries including oil, gas, petrochemical, food, and power generation. […]
- Introduction Aniline production from Phenol and Ammonia is a highly significant industrial chemical process. Aniline serves as a fundamental building block in the manufacturing of a […]
- Introduction The world is currently heavily reliant on non-renewable energy sources to meet the growing societal and economic demands of humanity. This reliance on fossil fuels […]
- Introduction Post-combustion carbon capture (PCC) has gained significant attention as a pivotal technology for mitigating greenhouse gas emissions and addressing climate change. HYSYS simulations, as a […]
- Description With the increase in the production of carbon dioxide, the concerns of the international community about global warming are increasing. The results of recent studies […]
- Description Batch distillation is one of the common methods for separating mixtures, but the separation of azeotropic mixtures is not possible by usual methods. For this […]
- Description In addition to improving the existing processes for energy production and consumption, the increase in global demand for natural gas also requires pollution control. One […]
- Description In the petrochemical industry, creative designs and process development methods should be considered with the aim of reducing the size of equipment, consuming less raw […]
- Description There are different methods to separate the components of a solution. One of these methods is the distillation process. In the distillation method, the components […]
- Introduction Natural gas supplies a large portion of the world’s growing energy demand, and this is likely to continue for several decades to come. Growing at […]
- Introduction In the fast-paced world of industry and technology, hydrogen has gained a special place as a clean energy carrier and a raw material for many […]
- Introduction Citric acid (2-hydroxypropane – 1,2,3-tricarboxylic acid) is a chemical compound that, due to high global demand, is one of the largest fermented products produced worldwide […]
- Introduction Given the environmental crises, the production of dimethyl ether (DME) as an environmentally friendly energy source has gained significant importance in the current industry. Although […]
- Description Natural gas extracted from gas reservoirs mainly contains a significant amount of gas condensate. Especially when the volume of gas withdrawal from the tank is […]
- Description Cyclohexane has the chemical formula C6H12. which is known by the names of hexahydrobenzene, hexamethylene, hexanaphthene. And its molecular weight is 84.16. This substance is […]
- Description Gas condensate refers to liquids that exist as gases under reservoir conditions but transform into liquids when temperature and pressure change. These liquids are primarily […]
- Description In addition to improving the existing processes for energy production and consumption, the increase in global demand for natural gas also requires pollution control. One […]
- Description Partial Differential Equations (PDEs) are a group of differential equations involving unknown functions of several independent variables and their partial derivatives with respect to those […]
- Introduction During the last decades, the optimal use of available energy has attracted a lot of attention. A lot of research has been done to suggest […]
- Introduction: Energy conservation and pollution reduction in industries are critical issues. Gas condensates, a significant component of extracted natural gas, are often wasted due to temperature […]
