- item-all
- (COMFAR) ECONOMIC
- (Datasheet) EQ. Sizing and Design
- Academic projects
- ANSYS Fluent
- ASPEN ADSIM
- Aspen Custom Modeler
- ASPEN EDR
- ASPEN Energy Analyzer (Pinch)
- ASPEN HYSYS
- ASPEN PLUS
- AutoCAD(2D Planning & 3D Equipment Design)
- Basic Engineering
- CATIA
- COMSOL _Multiphysics
- Conceptual Design
- Consequence Analysis
- Construction
- Current academic project
- Current industrial project
- Detailed Engineering
- Drafting (PFD-PID)
- DWSIM
- Energy/Exergy Analysis
- Engineering
- FEED
- FORTRAN
- FS/COMFAR-
- GAMBIT Fluent
- Industrial and semi-industrial projects
- MATLAB
- MC
- Optimization
- PFD P&ID
- PHAST
- Procurement
- REVIT & PDMS
- Sample of ChemEngProj
- SOLIDWORK
- Technical knowledge (License)
- Introduction You have recently been assigned to the ethylbenzene (EB) plant at the XYZ petrochemical facility. The center produces a wide range of monomers, polymers and […]
- Introduction Damun Petrochemical aims to produce benzene and toluene as one of the driving projects of the petrochemical industry, approved by the National Petrochemical Company (NPC), […]
- Description Crude oil is the first and most important step in refining crude oil. In this process, crude oil, which is a mixture of hydrocarbons, is […]
- Introduction There is a rapid growth in the use and demand of crude oil in various industrial fields. Therefore, gasoline prices are rising due to higher […]
- Introduction Total base number (TBN) boosters are chemical additives used in lubricants to increase their alkaline properties. The main purpose of these additives is to neutralize […]
- Introduction Due to the ever-increasing demand for energy and environmental concerns caused by the release of pollutants, improving the quality of fossil fuels, including diesel, has […]
- Introduction Excessive consumption of fossil fuels and, as a result, emission of greenhouse gases, including carbon dioxide (CO₂), is one of the main environmental challenges of […]
- Introduction In recent years, attention to biomethane as a clean and renewable fuel has increased greatly. One of the main methods of biomethane production is biogas […]
- Description Condenser heat exchanger design: vacuum tower: heat exchanger is a device that is used for optimal heat transfer from one environment to another environment. Heat […]
- Description Heat exchangers are almost the most used members in chemical processes and can be seen in most industrial units. They are devices that allow the […]
- Introduction Evaporator is one of the key equipments in evaporation and concentration processes. The evaporator is responsible for separating volatile substances (such as water) from non-volatile […]
- Introduction Damun Refining Petrochemical Company (Private Joint Stock) is engaged in a project aimed at producing benzene and toluene as one of the leading initiatives in […]
- Introduction The Maroon Petrochemical Company has been established on a land area of 102.5 hectares in two geographical locations: 1. Krit Camp Area in Ahwaz The […]
- Introduction This project focuses on developing a kinetic model for a complex chemical reaction using parallel optimization methods. The model design involves finding kinetic parameters that […]
- Introduction The South Pars Gas Complex, a major subsidiary of the National Iranian Gas Company, has been operating since 1998. It is responsible for the operation […]
- Introduction The citronella plants belong to important perennial herbaceous species. This family includes about 40 species, most of which are cultivated in Yunnan Province, China. Crude […]
- Description Process Description of Unit 105 – Ethane Recovery The objective of Unit 105 is to separate methane (CH4) and ethane (C2H6) from the raw gas […]
- Introduction Volatile Organic Compounds (VOCs) are a large group of organic compounds that easily evaporate at room temperature. These compounds are produced in various industries, including […]
- Introduction Differential distillation, also known as differential or Rayleigh distillation, is a key method for separating liquid components based on their boiling points. This process is […]
- Introduction This project focuses on simulating an innovative ammonia recovery system from digested liquid in wastewater treatment plants (WWTP) and its simultaneous use with biomethane in […]
- Introduction Choked Flow is one of the key phenomena in industrial systems and chemical processes that occurs when a compressible fluid passes through a nozzle, orifice […]
- Introduction Liquid gas (LPG) is mainly made of propane and butane. Butane has two forms: isobutane and normal butane. LPG has the lowest greenhouse gas emissions […]
- Introduction Methanol is one of the three most important products of chemical industries in the world and many substances are derived from it. Methanol is one […]
- Introduction LPG stands for Liquefied Petroleum Gas. It is a colorless, odorless, flammable gas composed of light hydrocarbons such as propane and butane. LPG is typically […]
